I have 10 cisco 3524 switches with ios verion on IOS (tm) C3500XL Software (C3500XL-C3H2S-M), Version 12.0(5.2)XU,
I have download the reqired software for cisco site (jave plugin) which has mentioned on the switch manual (desktop switching configuration guide)
and configure my browser as mentioned in the manual and I have also configured cluster on swtiches but as soon as i give the ip address of the switch just the first page is comming as soon as i click the "Cluster Management Suite or Visual Switch Manager " just the homepage is coming and again its diverting to cluster.html page but that page is not downloading and just its going on.
I want to know how to configure the four utilities i.e 1)cluster manager 2)visual switch manager 3) cluster builder 4)cluster view
[toc:faq]The ProblemOn traditional switches whenever we have a trunk
interface we use the VLAN tag to demultiplex the VLANs. The switch needs
to determine which MAC Address table to look in for a forwarding
decision. To do this we require the switch to do...
[toc:faq]Introduction:Netdr is a tool available on a RSP720, Sup720 or
Sup32 that allows one to capture packets on the RP or SP inband. The
netdr command can be used to capture both Tx and Rx packets in the
software switching path. This is not a substitut...
IntroductionOSPF, being a link-state protocol, allows for every router
in the network to know of every link and OSPF speaker in the entire
network. From this picture each router independently runs the Shortest
Path First (SPF) algorithm to determine the b...