Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Webcast-Catalyst9k
New Member

configuring a ethernet interface with 2 different ip addresses

Hi Hope someone can help.. I have a 3640 router with 2 ethernet modules in it (one port per modules) and running ios 12.2.3.. we are in the process of changing our internal ip addresses.. What we are looking to do is run 2 ip addresses on the internal interface (original ip and the new ip) until we cut everyone over. Can this be done with ios and how..

thanks

Christopher Curtin

christopher.curtin@oag.state.ny.us

1 ACCEPTED SOLUTION

Accepted Solutions
Gold

Re: configuring a ethernet interface with 2 different ip address

Configure the second IP address on your Ethernet interface with "ip address 1.2.3.4 255.255.255.0 secondary". The "secondary" keyword allows it to coexist with the primary address on that interface. You can have an arbitrary number of secondary IP addresses on a given interface.

2 REPLIES
Gold

Re: configuring a ethernet interface with 2 different ip address

Configure the second IP address on your Ethernet interface with "ip address 1.2.3.4 255.255.255.0 secondary". The "secondary" keyword allows it to coexist with the primary address on that interface. You can have an arbitrary number of secondary IP addresses on a given interface.

New Member

Re: configuring a ethernet interface with 2 different ip address

perfect.. Thanks for your help..

168
Views
0
Helpful
2
Replies
CreatePlease to create content