Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Configuring ISDN to Dial Multiple Sites

Can someone provide sample ISDN configuration that will allow a host site to dial a primary site and a secondary site. The host site will only dial the secondary site if it cannot establish a connection to the primary site.

Thanks in advance.

1 REPLY
Cisco Employee

Re: Configuring ISDN to Dial Multiple Sites

You can use the multiple dialer string command under the interface config at host side..Router will always dial the first one (top down order) and will go to the next one only if it can't connect at physical layer..Here is the sample config

http://www.cisco.com/warp/public/793/access_dial/ddr_dialer_profile.html

Configure all the hosts sites like "Cisco 1600" as in above url but with multiple dialer strings..Tejal

117
Views
0
Helpful
1
Replies