Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Webcast-Catalyst9k
New Member

configuring MIB object for CPU and memory utilisation

I've set the following snmp configuration on the router (c2620, c2600-i-mz.121-8.bin) so that customer can collect some information:

snmp-server view INFO system included

snmp-server view INFO interfaces included

snmp-server view INFO ipAddrEntry included

snmp-server community readinfo view INFO

Now, customer would also like to see information on CPU and memory utilisation. I have found the mib object "cpmCPUTotal5min" which should correspond to cpu utilisation over 5 minutes. But when I add next command, router is not excepting it. Maybe I have a wrong mib object.

Any ideas? Thanks in advance,

Kristina

1 REPLY
New Member

Re: configuring MIB object for CPU and memory utilisation

Hello,

you can try with this command snmp-server view INFO ciscoProcessMIB included, so you can read all info about cpu and processes.

I have just tried this setting on my 3640 with IOS 12.2.

Look at http://people.ee.ethz.ch/~oetiker/webtools/mrtg/ for graphing your cpu.

Andrea.

213
Views
0
Helpful
1
Replies
CreatePlease to create content