Configuring timeout for a isdn link in a cisco 700
I have a problem, i hope you can help me.
I have configured a cisco 761 to have access to the Internet. My problem is: when the trafic to the Internet is big the two channel of de link ISDN come up. After that don't have trafic the two channel don't going down, they stay active. If the trafic is just a little just one channel comes up and going down after he don't have trafic.
In my configuration a i have put a timeout of 120 sec with the command:
set timeout 120
in the profile of the Internet.
Wath can i do to the two channel comes down when active.
This document gives several answers on frequently asked questions for PFRv3 channel state behavior.
Q1: What are all the channel operational states from a BR (border role) perspective and what are the rules/conditions to be in each st...
The need was to reach an host inside a LAN through a VPN connection managed by the LAN gateway (Cisco 1921).
The LAN gateway performs NAT and there was a dedicate nat rule for the host i wanted to reach through VPN.
I couldn't connect to the hos...
We have 3 identical switches configured by someone else and would like to claim some of the Gigabit ports(G1/G2/G3/G4) for use on servers. When we try to change the wiring and configuration, we run in to connectivity issues. Attached is a des...