Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

configuring Vlan on cisco 2900xl switch

hello

i m applying vlan on my cisco 2900xl switch

i want 2 make the range (port no 8 to port no 16) a part of my vlan 10.

what is the range command to make this range of ports to be the part of vlan 10.

5 REPLIES
New Member

Re: configuring Vlan on cisco 2900xl switch

int range fa0/8 - 16

switchport access vlan 10

New Member

Re: configuring Vlan on cisco 2900xl switch

hello

thanx for the command.i try it but it doesn't accept it.the ios version of cisco 2900xl switch is "Version 12.0(5.2)XU"

any further suggestions--?

Silver

Re: configuring Vlan on cisco 2900xl switch

the 2500xl-3500xl software doesn't support the range command.

Purple

Re: configuring Vlan on cisco 2900xl switch

you will have manually input that command on each interface .

New Member

Re: configuring Vlan on cisco 2900xl switch

You can try cut/paste the config (sh run) into a notepad window, then modify the settings on a few and cut/paste the changes for the rest of the interfaces.

Once you are done with the config, cut/paste into the configur mode.

Cheers,

Jim

456
Views
4
Helpful
5
Replies
CreatePlease to create content