Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Webcast-Catalyst9k
New Member

Connecting 2x 3550's and routing

We have 2x 3550's that are linked by 100MB.

We want to implement 1 Vlan per switch so Vlan 10 and Vlan 11 and we plan to give each switch an ip address for the Vlan. How can Vlan 10 on switch 1 talk to a device in Vlan 11 on the other switch? The 100MB will be a trunk. Do we have to configure an SVI for both VLANs on both switches and use HSRP?

Will this work?

1 REPLY
VIP Purple

Re: Connecting 2x 3550's and routing

Hello,

yes, configure the SVIs for both VLANs on both switches, and configure the standby (HSRP) groups according to your needs. It might be a good idea to configure e.g. one of the switches as active for one group and standby for the other, and the other switch in a similar way, in order to achieve some sort of redundancy:

HTH,

GP

89
Views
0
Helpful
1
Replies
CreatePlease to create content