Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Webcast-Catalyst9k
New Member

Connecting a 2509 to the Internet

Hi Guys,

I am using a 2509 as my access server. It 2 Serials, aui, and a console port. I have 5 static IPs and i am trying to assign 1 to this router so I cann access this from outside my home.

But, my Comcast modem (Or my Linksys Router) has RJ-45 connector.

How do I connect this to the internet? Is there an adapter for the Serial (not the smart serials, see pic) to RJ-45?

Thanks in advance!

Robin


2509.JPG

3 REPLIES

Connecting a 2509 to the Internet

You could try something like this:

http://www.cablesandkits.com/centrecom-210t-aui-to-ethernet-transceiver-at210t-p-144.html?gclid=CLD1uf2r0rkCFVNo7AodCUIAkg

HTH,
John

*** Please rate all useful posts ***

HTH, John *** Please rate all useful posts ***
Super Bronze

Re: Connecting a 2509 to the Internet

Disclaimer

The   Author of this posting offers the information contained within this   posting without consideration and with the reader's understanding that   there's no implied or expressed suitability or fitness for any purpose.   Information provided is for informational purposes only and should not   be construed as rendering professional advice of any kind. Usage of  this  posting's information is solely at reader's own risk.

Liability Disclaimer

In   no event shall Author be liable for any damages whatsoever (including,   without limitation, damages for loss of use, data or profit) arising  out  of the use or inability to use the posting's information even if  Author  has been advised of the possibility of such damage.

Posting

If I remember correctly, there's a converter module to allow the AUI to work with 10baseT (half duplex only).

Hall of Fame Super Gold

Connecting a 2509 to the Internet

That router is very, very old and does not have not even close to the perfomances needed for today broadband.

332
Views
0
Helpful
3
Replies
CreatePlease to create content