cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
225
Views
0
Helpful
1
Replies

Connecting E3 ATM Module on a 3745 to an E3 Serial Port Adapter on a 7206

grant.bishop
Level 1
Level 1

Hi

I have a E3 ATM Module on a 3745 router and a E3 Serial Port Adapter on a 7206 router. Is there any possibility that i can use the ATM E3 interface as a serial port adapter and so get the two interfaces to talk to one another and pass traffic.

regards

Grant

1 Reply 1

Frederic Vanderbecq
Cisco Employee
Cisco Employee

One possibility you have to make that interconnection is to use ATM to FR internetworking but that requires a device in the middle which does the ATM to FR conversion

Using an ATM-DXI modem connected to the serial interface could also do the trick. Have a look to the following URLs:

http://www.cisco.com/warp/customer/121/atmdxi.html

http://www.cisco.com/pcgi-bin/Support/browse/psp_view.pl?p=Internetworking:ATM:ATM_FR_IWF&s=Implementation_and_Configuration

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:

Innovations in Cisco Full Stack Observability - A new webinar from Cisco