Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Connecting to Cisco2620 Con0 via a Chase Iolan

Hello chaps,

I am looking to set up a Chase Iolan terminal server so I can telnet to it and connect through one of its ports to con0 on a cisco2620.

I cant find any info on this, can anyone help:

1. what type of cable.

2.any additional config required on the cisco for con0 access.

3.any special setting s on the iolan.

if anyone can point me in the right direction i would appreciate it,

cheers

RIchard

2 REPLIES
Cisco Employee

Re: Connecting to Cisco2620 Con0 via a Chase Iolan

Never worked with Chase terminal server but 2620 runs with the console setting, 9600, 8, None, 1 and you need to use the rollover cable for access. So you need to set the terminal server etc accordingly.

Bronze

Re: Connecting to Cisco2620 Con0 via a Chase Iolan

No special config commands you need on the console on Cisco end.

For more on the Iolan device, I think you should try their website www.perle.com.

~Zulfi

125
Views
0
Helpful
2
Replies