Querying the db directly is not recommended. Even if you know the db password, the db schema is not published, so how would you know which tables to refer to?. You could easily end of corrupting the db, not supported.
Thank you for answering my question. I understand that it may be difficult to find the right information in the rme-database when the schema isn't known. But what do you think about getting information about the serial numbers of about appr. 1100 routers ? This information is already retrieved by rme-inventory but only gets extracted by the detailed device report. This report can be activated for only 50 devices at a time and is formatted in a way which makes it impossible to work on by excel. When creating a custom report for the information i need (serial number from all modules within the router) i get only the chassis serial number.
I want to access the database to retrieve information not to change something.
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...