we have 6 AS5300 Servers and One 7200 VXR router which are connected via a Catalyst 2926 switch. Remote Users when dialing and connecting,the connection gets intermittently hanged. Also when pinging from NAS to the router (with say aroung 500 Repeat count) you get intermittent timeouts.Whereas if you ping the otherway round from router to NAS there is no timeout.The same issue is at our different POP locations also.
The timing out may be due to many reasons. Delay could be one of them. Also check if the clock rate is the same on both sides. Another possibility might be a routing issue. If there are multiple paths, then the packets might be getting load balanced and hence the packets might be dropped in one direction. Please check the routing table and also check for discontinuous network configuration
Hi everyone, I would like to thank you in advance for any help you can provide a newcomer like myself!
Im studying the 100-105 book by Odom and am currently on the topic of Port security. I purchased a used 2960 and I'm trying to follow a...
While deploying a number of 18xx/2802/3802 model access points (APs), which run AP-COS as their operating platform. It can be observed on some occasions that while many of their access points were able to join the fabric WLC withou...
I am going to design and build an LAN network under a tunnel underground with long distance between the switches.
I will have 2 Catalyst switches and 8 Industrial IE3000, and they will be connected with fiber.
For now I am planning on use Layer-2 s...