Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Connection ISDN phone direct to a VIC 2B-NT/TE

Is it possible to connect ISDN phone direct to a VIC 2B-NT/TE.

1 REPLY
Anonymous
N/A

Re: Connection ISDN phone direct to a VIC 2B-NT/TE

Yes, this can be done

NT/TE VWIC-BRI means you have the

capabilities of simulating a network side isdn i.e. presenting the router as an isdn switch to the isdn phone.

configs below.

VIC-2BRI-NT/TE

!

isdn switch-type basic-net3

!

interface bri 0

no ip address

isdn switch-type basic-net3

isdn overlap-receiving

isdn twait-disable

isdn incoming-voice voice

isdn layer1-emulate network

isdn protocol-emulate network

235
Views
0
Helpful
1
Replies