I have two igx 8430 node network and have three 2mb iplc links between two nodes. Now I have seen whenever my two of three iplc went down it takes time to re-route channels on third iplc and we also seen that by that time data and voice calls gets dropped . Is there any way i can reduce failover time so that we can avoid voice and data drop. As far as I know voice calls should not drop since it is controlled by NPM. We have UXME modules and all the iplc links are terminated on uxme card.
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...