02-15-2006 04:41 AM - edited 03-03-2019 01:51 AM
Hi,
I have two switches, 3750 (12 SFP ports) and 2950 (with 2 GBIC ports) and I want to connect the GBIC from 2950 and SFP from 3750 interfaces at gigabit speed. Are there special fiber patches for doing this (with one end for SFP and the other for GBIC)?
Thanks in advance
Solved! Go to Solution.
02-15-2006 04:48 AM
HI Gabriel,
Depending on the type of SFP you are using, you will need one of the following types of cables:
Single Mode LX LC-to-SC Connectors
Fiber Multimode SX LC-to-SC Connectors
The SFP uses an LC-terminated cable ....
Hope that helps - pls rate the post if it does.
Paresh
02-15-2006 04:48 AM
HI Gabriel,
Depending on the type of SFP you are using, you will need one of the following types of cables:
Single Mode LX LC-to-SC Connectors
Fiber Multimode SX LC-to-SC Connectors
The SFP uses an LC-terminated cable ....
Hope that helps - pls rate the post if it does.
Paresh
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide