Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Console access to 6509

We have recently worked on one of our 6509s to upgrade the IOS on the MFSC. Now, when we attempt to connect to the 6509 via the console port, we go right to the MFSC. We have always connected to the switch first, then sessioned into the MFSC. Does anyone have an idea what happened and how we can fix it?

1 ACCEPTED SOLUTION

Accepted Solutions

Re: Console access to 6509

At the router prompt, press Ctrl-C three times and this should help you exit from the MSFC prompt to the switch CLI.

Console> (enable) switch console 15

Trying Router-15...

Connected to Router-15.

Type ^C^C^C to switch back...

Router> ^C^C^C

Console> (enable)

Hope that helps!

1 REPLY

Re: Console access to 6509

At the router prompt, press Ctrl-C three times and this should help you exit from the MSFC prompt to the switch CLI.

Console> (enable) switch console 15

Trying Router-15...

Connected to Router-15.

Type ^C^C^C to switch back...

Router> ^C^C^C

Console> (enable)

Hope that helps!

100
Views
0
Helpful
1
Replies
CreatePlease login to create content