05-17-2003 09:05 AM - edited 03-02-2019 07:25 AM
We have recently worked on one of our 6509s to upgrade the IOS on the MFSC. Now, when we attempt to connect to the 6509 via the console port, we go right to the MFSC. We have always connected to the switch first, then sessioned into the MFSC. Does anyone have an idea what happened and how we can fix it?
Solved! Go to Solution.
05-17-2003 09:26 AM
At the router prompt, press Ctrl-C three times and this should help you exit from the MSFC prompt to the switch CLI.
Console> (enable) switch console 15
Trying Router-15...
Connected to Router-15.
Type ^C^C^C to switch back...
Router> ^C^C^C
Console> (enable)
Hope that helps!
05-17-2003 09:26 AM
At the router prompt, press Ctrl-C three times and this should help you exit from the MSFC prompt to the switch CLI.
Console> (enable) switch console 15
Trying Router-15...
Connected to Router-15.
Type ^C^C^C to switch back...
Router> ^C^C^C
Console> (enable)
Hope that helps!
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide