Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Webcast-Catalyst9k

Console locked - Password check with invalid encryption type

HI,

 

So it appers that my console access is locked.  Worst thing is that my ssh vty is not setup properly so I can't access the switch.

 

What I don't understand I did not change any configuration under console 0 but only under vty.


Basically password for username was changed from password 7 to 5 and the following commands were performed:

 

username ciscoAdmin privilege 15 secret  <password>

 

Original settings:

line vty 0 4

password 7 <password>

logging synchronous

login

transport input ssh

 

 

Removed

No password 7 <password>

And added

login local

 

Console config:
 

line con 0

password 7 <password>

logging synchronous

login authentication CONSOLE

!

aaa authentication login CONSOLE line

 

Note this was done only under vty and not console.  I don't understand how this change would mess with console settings.

 

Now when accessing via console following commands pops up: Password check with invalid encryption type

 

I'm afraid I will need to reboot the switch since i didn't save the settings so it would go back to original.

 

Any advice would be greatly appreciated.

 

Thanks in advance.

61
Views
0
Helpful
0
Replies
CreatePlease to create content