Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Console timeout command on CatOS?

The command 'set logout <time>' for the CatOS (please see the link below) did not clearly mention if this command also applies for the console port. Can anybody confirm if this command applies to both console and telnet idle sessions?

http://www.cisco.com/univercd/cc/td/doc/product/lan/cat6000/sw_6_3/cmd_ref/set_m_pi.htm#35928

Thanks in advance.

2 REPLIES
Bronze

Re: Console timeout command on CatOS?

As far as I know, the set logout command is used for the console connection. I am not aware of an exec timeout command for telnet sessions for the CAT OS.

New Member

Re: Console timeout command on CatOS?

Please see the description under the 'Accessing the Switch CLI' from the following link:

http://www.cisco.com/en/US/products/hw/switches/ps700/products_configuration_guide_chapter09186a00800ea9f8.html#xtocid3

Thanks.

300
Views
0
Helpful
2
Replies