hi i have CSS 11000, and my problem is the following.
i have three network, 192.168.1.0, 192.168.4.0, and 192.168.6.0 . the css has an ip address of 192.168.4.20 and hides the 192.168.6. network. everything works fine and my web server on the 192.168.6 net can be seen by the internet but for some reason. i can't connect directly to the 192.168.6. network ( of course i use the VIP address) from the 192.168.1.0 network
for example my web server is on the VIP 192.168.4.5.
if i am on the 192.168.4 net if i pull up a web browser and type 192.168.4.5 the web page comes up, but if i try this from the 192.168.1 net, i can't i checked my access list and all and its fine. i can also see the stats on the css and it shows the site being hit but never makes it back to the 6 network.
any ideas? is there a command on the css for this?
Hi everyone, I would like to thank you in advance for any help you can provide a newcomer like myself!
Im studying the 100-105 book by Odom and am currently on the topic of Port security. I purchased a used 2960 and I'm trying to follow a...
While deploying a number of 18xx/2802/3802 model access points (APs), which run AP-COS as their operating platform. It can be observed on some occasions that while many of their access points were able to join the fabric WLC withou...
I am going to design and build an LAN network under a tunnel underground with long distance between the switches.
I will have 2 Catalyst switches and 8 Industrial IE3000, and they will be connected with fiber.
For now I am planning on use Layer-2 s...