I am trying to work out how to correctly contend my Internet customers. Each of their circuits is presented by a VLAN. I have tried access lists but the big problem is that as some customers have more IP addresses than others and so some get more of a slice of the bandwidth. I have been told that I can use the MSFC2 PFC2 supervisor on the 6509 that we have that acts as a VTP server delivering clients service over gigabit ethernet to contend customer vlans. The issue is that contention per VLAN is only one way which is doesnt really help as we deliver synchronous service, is this the case? I need to be able to set a minimum and maximum burstable bandwidth per customer can this be done and if so where and how.
Hi everyone, I would like to thank you in advance for any help you can provide a newcomer like myself!
Im studying the 100-105 book by Odom and am currently on the topic of Port security. I purchased a used 2960 and I'm trying to follow a...
While deploying a number of 18xx/2802/3802 model access points (APs), which run AP-COS as their operating platform. It can be observed on some occasions that while many of their access points were able to join the fabric WLC withou...
I am going to design and build an LAN network under a tunnel underground with long distance between the switches.
I will have 2 Catalyst switches and 8 Industrial IE3000, and they will be connected with fiber.
For now I am planning on use Layer-2 s...