Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Controlling the order ISDN circuits are used

When several ISDN BRI circuits in the same group in a 4 port module are configured for multilink PPP dial backup, is there a way to select which BRI will be used to dial out first?

2 REPLIES
Cisco Employee

Re: Controlling the order ISDN circuits are used

YES..you can configure the priority of the interface to be used for dialout..You need to use "dialer priority xxx" command under the interface for that..Here is the url for more..You can also use it under physical interface.

http://www.cisco.com/univercd/cc/td/doc/product/software/ios121/121cgcr/dial_r/drdrd.htm#xtocid32

Some config links using that

http://www.cisco.com/warp/public/129/23.html

New Member

Re: Controlling the order ISDN circuits are used

Thank you, That is exacticaly what I needed.

85
Views
0
Helpful
2
Replies