I inheirited a network which consisits of 45 branch locations and the HQ. In the HQ we have a Cicso 2620 with 2 WIC's (1 controlling the frame for the branch offices and 1 for the internet pipe). Behind the router I have my firewall (Watchguard Firebox II). I am able to control the internet usage for the home office but the branch offices can access anything they want. Is there anyway I can setup the branch offices to "go through" the router without bypassing the firewall to monitor/block usage on the internet without going into huge access-lists? Thanks!
if your 2620 has an extra ethernet port, you can connect it to the DMZ connection on the Watchguard and route all the branch traffic that way. That will give you complete control of the branch traffic.
We are pleased to announce availability of Beta software for 16.6.3.
16.6.3 will be the second rebuild on the 16.6 release train targeted
towards Catalyst 9500/9400/9300/3850/3650 switching platforms. We are
looking for early feedback from customers befor...
Introduction Featured Speakers Luis Espejel is the Telecommunications
Manager of IENova, an Oil & Gas company. Currently he works with Cisco
IOS® and Cisco IOS XE platforms, and NX to some extent. He has also
worked as a Senior Engineer with the Routing P...
In this session you can learn more about Layer 3 multicast and the best
practices to identify possible threats and take security measures. It
provides an overview of basic multicast, the best security practices for
use of this technology, and recommendati...