Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

SAP
New Member

Convert ATM To Frame & Vice Versa

Hi :)

let me tell you a little about my situation. Palo Alto, CA is connected to Philly with ATM. Philly has remote sites and the line is frame-relay. We are now having the provider setup dlci/pvc from the remote sites to palo alto, ca and activate only if the site between philly and remote sites go down.

What is the command to convert atm into frame and vise versa?

Thanks!! :)

1 ACCEPTED SOLUTION

Accepted Solutions
New Member

Re: Convert ATM To Frame & Vice Versa

Hi,

Looks like you are doing ATM to FR IWF. There is no such command convert atm into frame. Carrier will do the translation between ATM PVC and the Frame-Relay DLCI. You will config the ATM PVC and Frame PVC the normal way.

Check the URL for detail:

http://www.cisco.com/en/US/tech/tk39/tk53/technologies_configuration_example09186a0080094588.shtml

Regards,

Bessie

4 REPLIES
SAP
New Member

Re: Convert ATM To Frame & Vice Versa

Thanks! but, i'm a little confuse...i have a ATM Mux of 6Mb to Philly...So, i want the pvc's/dlci to link to the ATM Mux, but like i mentioned before the remote sites are frame-relay.

New Member

Re: Convert ATM To Frame & Vice Versa

Hi,

Looks like you are doing ATM to FR IWF. There is no such command convert atm into frame. Carrier will do the translation between ATM PVC and the Frame-Relay DLCI. You will config the ATM PVC and Frame PVC the normal way.

Check the URL for detail:

http://www.cisco.com/en/US/tech/tk39/tk53/technologies_configuration_example09186a0080094588.shtml

Regards,

Bessie

SAP
New Member

Re: Convert ATM To Frame & Vice Versa

perfect!!!!!...that makes my life a whole lot easier :)

here's kisses and hugs :)

92
Views
0
Helpful
4
Replies
CreatePlease to create content