Trying to come up with a plan to convert our addresses behind our firewall from a 10.0.0.0 255.0.0.0 to 10.0.0.0 255.255.255.0 in stages rather than all at once.
Presently we have 25 network segments all connected to a 2980g switch (flat).
We want to introduce an 8510csr router/switch with 32 etherports into the design.
Our campus presently uses about 600 ip's out the 10.0.0.0 255.0.0.0 addresses.
My question is this; If I modify our dhcp to be subnets and then apply these subnets of 10.0.0.1-254 255.255.255.0 on the first port of the 8510, 10.0.1.1-254 255.255.255.0 on the second port and 10.0.0.2.1-254 255.255.255.0 on the third port... and connected all three of these ports to the 2980g.. would this work? Would the switch be able to handle multiple subnets connected to it and would the campus workstations be allocated ip's?
If this would work temporally, we could then move each network segment permantly to a port on the 8510csr and test one at a time.
Any advise or thoughts or other ideas of how to achieve this is greatly welcome.
Forgot another question I wanted to ask; In windows 2000 I can create a Superscope that allows me bundle multilple subnets into a single scope in dhcp.. is there anyway to do this on a port on an 8510csr router?
This is actually a pretty cool feature, i didn't even know it existed until I was looking for a solution to advertise a subnet (prefix in BGP talk), only if a certain condition existed. This is exactly what conditional advertisements does
j ai une question j ai achete un routeur cisco 887VA-k9 , je le configuré avec la configuration ci- dessous
si je le lier avec mon pc portable sur l un de ses ports directement ça marche toute est bien ( la connexion internet + m...
Attached policy provides CLI access to the Cisco 4G router over text messaging. Two files are in the attached .tar file:
2. PDF with instructions on how to load and use the .tcl file.