Re: copy running-config ftp command, reloads a 805 router

juan.gaytan · ‎10-23-2002

Hi,

We have several 805 routers deployed on the Net, for management pourposes we back-up the configuration from time to time.

Sometimes, when we try to do the back-up, the 805 routers attempt to write the config-file in the Solaris server, but before to send the file, the routers reloads, (This happend sometimes, usually the back-up is succesfull).

nhabib · ‎10-24-2002

Hello Juan,

Please provide the output of show ver from the router, as this could be an issue

with the IOS.

juan.gaytan · ‎10-30-2002

Hi. This is the show version command.

CPE01MEXIMS>sh ver

Cisco Internetwork Operating System Software

IOS (tm) C805 Software (C805-SY6-MW), Version 12.1(3)T, RELEASE SOFTWARE (fc1)

Compiled Wed 19-Jul-00 10:01 by ccai

Image text-base: 0x0017E000, data-base: 0x00735000

ROM: TinyROM version 1.4(1)

CPE01MEXIMS uptime is 1 week, 1 hour, 4 minutes

System returned to ROM by power-on

System restarted at 09:14:13 cdt Wed Oct 23 2002

System image file is "flash:c805-sy6-mw.121-3.T"

Cisco C805 (MPC860) processor (revision 0) with 47824K bytes of virtual memory.

Processor board ID JAD05500EN6

CPU part number 33

X.25 software, Version 3.0.0.

Bridging software.

1 Ethernet/IEEE 802.3 interface(s)

1 Serial(sync/async) network interface(s)

8M bytes of physical memory (DRAM)

8K bytes of non-volatile configuration memory

4M bytes of flash on board

Configuration register is 0x2102