Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

copy running-config ftp command, reloads a 805 router

Hi,

We have several 805 routers deployed on the Net, for management pourposes we back-up the configuration from time to time.

Sometimes, when we try to do the back-up, the 805 routers attempt to write the config-file in the Solaris server, but before to send the file, the routers reloads, (This happend sometimes, usually the back-up is succesfull).

2 REPLIES
Red

Re: copy running-config ftp command, reloads a 805 router

Hello Juan,

Please provide the output of show ver from the router, as this could be an issue

with the IOS.

New Member

Re: copy running-config ftp command, reloads a 805 router

Hi. This is the show version command.

CPE01MEXIMS>sh ver

Cisco Internetwork Operating System Software

IOS (tm) C805 Software (C805-SY6-MW), Version 12.1(3)T, RELEASE SOFTWARE (fc1)

Copyright (c) 1986-2000 by cisco Systems, Inc.

Compiled Wed 19-Jul-00 10:01 by ccai

Image text-base: 0x0017E000, data-base: 0x00735000

ROM: TinyROM version 1.4(1)

CPE01MEXIMS uptime is 1 week, 1 hour, 4 minutes

System returned to ROM by power-on

System restarted at 09:14:13 cdt Wed Oct 23 2002

System image file is "flash:c805-sy6-mw.121-3.T"

Cisco C805 (MPC860) processor (revision 0) with 47824K bytes of virtual memory.

Processor board ID JAD05500EN6

CPU part number 33

X.25 software, Version 3.0.0.

Bridging software.

1 Ethernet/IEEE 802.3 interface(s)

1 Serial(sync/async) network interface(s)

8M bytes of physical memory (DRAM)

8K bytes of non-volatile configuration memory

4M bytes of flash on board

Configuration register is 0x2102

119
Views
0
Helpful
2
Replies
CreatePlease login to create content