Thanks for your response, I do have the CAB-5MODCM adapter but the problem that I am having is when I am in the process of configuring the modem according to a document from cisco, I have to enter the following string in the modem and get the an OK response back(which is not happening).
The string is the following:
I am not getting the ok back from the modem when I entered the above string...That is why I am questioning the adapter that I have....
[toc:faq]The ProblemOn traditional switches whenever we have a trunk
interface we use the VLAN tag to demultiplex the VLANs. The switch needs
to determine which MAC Address table to look in for a forwarding
decision. To do this we require the switch to do...
[toc:faq]Introduction:Netdr is a tool available on a RSP720, Sup720 or
Sup32 that allows one to capture packets on the RP or SP inband. The
netdr command can be used to capture both Tx and Rx packets in the
software switching path. This is not a substitut...
IntroductionOSPF, being a link-state protocol, allows for every router
in the network to know of every link and OSPF speaker in the entire
network. From this picture each router independently runs the Shortest
Path First (SPF) algorithm to determine the b...