cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
513
Views
0
Helpful
1
Replies

Correct modem state - External USR

cisman333
Level 1
Level 1

http://www.cisco.com/en/US/docs/ios/termserv/command/reference/tsv_cr_book.pdf

TSV-148

Cisco IOS Terminal Services commands

July 2011

Modem state

Modem control state. Although the sample output shows the modem state

Idle, this field should always say READY.

http://www.cisco.com/en/US/tech/tk801/tk133/technologies_tech_note09186a00800b1149.shtml

while on the link above suggested that the propper modem state is:

Idle

CTS noDSR DTR RTS

These are the proper modem states for connections between an access server or router and a modem (when there is no incoming call). Output of any other kind generally indicates a problem.

I am confused guys ! any clues ?

1 Reply 1

paolo bevilacqua
Hall of Fame
Hall of Fame

Can be documentation error, of which there are very many.

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:

Innovations in Cisco Full Stack Observability - A new webinar from Cisco