Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

COS-DSCP Map

I have been setting up auto qos on some 3550s and a 4507 switch and I have a question. Before auto qos, Cisco recommended changing the default cos to dscp mapping from 0 8 16 26 32 46 48 56 to 0 8 16 26 34 46 48 56, but the auto qos puts the former mapping into the config. Is it still recommended to manually change this in the config, and what effect would this have in a voice (CCM) and data environment?

Any comments are appreciated.

1 REPLY
Silver

Re: COS-DSCP Map

Auto QoS modifies CoS-to-DSCP and IP precedence-to-DSCP mappings in LANs and automatically classifies RTP payload and VoIP control packets in WANs. Manual configuration is not necessary.

Please take a look at the following white paper and FAQs for details.

http://www.cisco.com/en/US/tech/tk543/tk759/technologies_white_paper09186a00801348bc.shtml

http://www.cisco.com/en/US/products/hw/video/ps1870/products_qanda_item09186a0080134a66.shtml

246
Views
0
Helpful
1
Replies