Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Webcast-Catalyst9k
New Member

Counters reported by SNMP will not be affected

HI, I have a 6500 switch, It?s working with CatOS 8.3(7), do you know a command to clear counters reported by snmp, I only know the command clear count mod/pto and the output show me:

This command will reset MAC and port counters reported by the CLI for port(s) 2/12.

Counters reported by SNMP will not be affected.

Do you want to continue (y/n) [n]?

So it?s possible "affected counters reported by snmp" using some command

thans and best regards

1 REPLY
Red

Re: Counters reported by SNMP will not be affected

The only way to clear the SNMP counters is to reset the switch.

Last line in the following URL states:

"In addition, SNMP counters are never cleared, even if the interfaces are cleared."

http://www.cisco.com/en/US/tech/tk648/tk362/technologies_q_and_a_item09186a00800b69ac.shtml

161
Views
0
Helpful
1
Replies
CreatePlease to create content