CPU utilization

[f.fatima]

Hi,

I’d like to know starting of use of CPU from which you can say that the chassis 4506 is saturated.

in the same way for the catyst 2950 and 2924.

There are other means to make a diagnostic on this equipment in the absence of an administration tool.

thanks

[owillins]

You can look at the online diagnostics with the following commands for the SupIII/IV.

show diagnostics power-on

show diagnostics online module

For details refer:

http://www.cisco.com/univercd/cc/td/doc/product/lan/cat4000/12_1_13/cmdref/show1.htm#21073