Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Webcast-Catalyst9k
New Member

cpu utilization

Hi,

Please help to understand the difference between when there is high CPU utilization in 2960 XR and 3850 XE switches. 

Regards,

Prashirsha

2 REPLIES
VIP Purple

That really depends on what

That really depends on what process is causing the issu, 2960s and 3850s are different hardware architecture and different process can be at fault you cant comnpare the 2 as theer so different in the way there built

This explains how to TShoot a 3850 cpu issue

http://www.cisco.com/c/en/us/support/docs/switches/catalyst-3850-series-switches/117594-technote-hicpu3850-00.html

This for 2960s and other standard ios catalyst access/dist switches

http://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst3750/software/troubleshooting/cpu_util.html

New Member

Hi Mark,

Hi Mark,

Thanks for the reply but in think they both have different queuing size so if there will be high utilization than according to the queuing size the high priority traffic can be send easily in 3850 than 2960.

Please put some more light on this and correct me if i am wrong.

Regards,

Prashirsha

70
Views
0
Helpful
2
Replies
CreatePlease to create content