Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

Creating an Uplink Port

I'm needing to create an uplink port on a c2924xl. Can anyone point me to the correct documenation.

Thanks in advance

2 REPLIES
Cisco Employee

Re: Creating an Uplink Port

There is no special configuration needed. If it is just one VLAN, assign the interface to whatever VLAN you want. If you want it to be a trunk, configure trunking under the interface. You can find some config examples at

http://www.cisco.com/warp/public/473/141.html

Community Member

Re: Creating an Uplink Port

The problem is that I don't have a VLAN setup. I have recently inheraited this network and I have 2 Netgear switchs, 2 Linksys switchs, 1 Cisco Hub (400 series) and 1 Cisco 2900 switch. I'm trying to add a new 2900 switch and I'm not sure how to setup one of the ports as uplink.

105
Views
0
Helpful
2
Replies
CreatePlease to create content