Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Creating etherchannel - different media

Hi,

I have a questions. I would like to create an etherchannel between a stack formed by two 3750 and a 7204 router with a NPE-G1.The conecction would be as follows:

1 3750 Stack 1---Copper 1Gb ------- 7204

2 3750 Stack 1---SX 1 Gb -----------7204

Would this create a 2 Gbps port channel or not? Would this be a problem?

Thanks and kindest regards,

Fernando

1 ACCEPTED SOLUTION

Accepted Solutions

Re: Creating etherchannel - different media

Hi Fernando,

AFAIK if the speed capability is same media does not matter.

As both copper and your SX are 1 GB it should work without any issues.

Have a look at this

http://www.cisco.com/univercd/cc/td/doc/cisintwk/idg4/nd2012.htm

HTH, if yes please rate the post.

Ankur

2 REPLIES

Re: Creating etherchannel - different media

Hi Fernando,

AFAIK if the speed capability is same media does not matter.

As both copper and your SX are 1 GB it should work without any issues.

Have a look at this

http://www.cisco.com/univercd/cc/td/doc/cisintwk/idg4/nd2012.htm

HTH, if yes please rate the post.

Ankur

New Member

Re: Creating etherchannel - different media

no entiendo muy bien lo que queres hacer pero no me parese una buena idea ?

612
Views
0
Helpful
2
Replies
CreatePlease login to create content