access-list 101 permit udp any any range 2048 2305
access-list 101 permit udp any any eq 1719
access-list 101 permit tcp any any eq 1720
access-list 101 permit tcp any any eq 1037
and assigned to queues thus:
queue-list 1 protocol ip 1 list 101
queue-list 1 default 2
and then assigned them to ports like this:
Does this look correct? What I want is the above UDP and TCP ports to be put into queue #1 and everthing else into queue #2. It just seems that there is something missing - I don't need to assign the access-lists to an interface?
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...