CW2000 - Management of IGX URM Modules

[akirkby]

Can anybody please give me an indication as to when Cisco Works will be able to support the IGX URM module?

Andy.

[rmushtaq]

Contact TAC to verify this.

[akirkby]

I have found the info necessary within the RME documentation.

[cschwaig · Accepted solution]

The CiscoWorks applications that support the URM are:

1. Resource Manager Essentials or RME (URM-2FE and URM - 2FE+2V) via IDU patch 2.0 available at

http://www.cisco.com/cgi-bin/tablebuild.pl/cw2000-rme

More about RME at http://wwwin.cisco.com/cmc/cc/pd/wr2k/rsmn/.

and

2. Device Fault Manager or DFM (IGX-URM-2FE1 and IGX-URM-2FE-2V1) via IDU patch 1.2.3, available at

http://www.cisco.com/cgi-bin/tablebuild.pl/cw2000-dfm.

More about DFM at http://wwwin.cisco.com/cmc/cc/pd/wr2k/dvftmn/.

Christian