Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Webcast-Catalyst9k
New Member

CW2000 - Management of IGX URM Modules

Can anybody please give me an indication as to when Cisco Works will be able to support the IGX URM module?

Andy.

1 ACCEPTED SOLUTION

Accepted Solutions
New Member

Re: CW2000 - Management of IGX URM Modules

The CiscoWorks applications that support the URM are:

1. Resource Manager Essentials or RME (URM-2FE and URM - 2FE+2V) via IDU patch 2.0 available at

http://www.cisco.com/cgi-bin/tablebuild.pl/cw2000-rme

More about RME at http://wwwin.cisco.com/cmc/cc/pd/wr2k/rsmn/.

and

2. Device Fault Manager or DFM (IGX-URM-2FE1 and IGX-URM-2FE-2V1) via IDU patch 1.2.3, available at

http://www.cisco.com/cgi-bin/tablebuild.pl/cw2000-dfm.

More about DFM at http://wwwin.cisco.com/cmc/cc/pd/wr2k/dvftmn/.

Christian

3 REPLIES
Blue

Re: CW2000 - Management of IGX URM Modules

Contact TAC to verify this.

New Member

Re: CW2000 - Management of IGX URM Modules

I have found the info necessary within the RME documentation.

New Member

Re: CW2000 - Management of IGX URM Modules

The CiscoWorks applications that support the URM are:

1. Resource Manager Essentials or RME (URM-2FE and URM - 2FE+2V) via IDU patch 2.0 available at

http://www.cisco.com/cgi-bin/tablebuild.pl/cw2000-rme

More about RME at http://wwwin.cisco.com/cmc/cc/pd/wr2k/rsmn/.

and

2. Device Fault Manager or DFM (IGX-URM-2FE1 and IGX-URM-2FE-2V1) via IDU patch 1.2.3, available at

http://www.cisco.com/cgi-bin/tablebuild.pl/cw2000-dfm.

More about DFM at http://wwwin.cisco.com/cmc/cc/pd/wr2k/dvftmn/.

Christian

106
Views
0
Helpful
3
Replies
CreatePlease to create content