Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Webcast-Catalyst9k
New Member

CW2000 & nGENIUS RTM on same server

My question is the following:

Can I install nGenius RTM on the same server that is running CW2000?

Would it work? Are any special requirements to do this?

Any recommendations?

Thanks.

6 REPLIES
Blue

Re: CW2000 & nGENIUS RTM on same server

It is recommended to install both on a separate server for better performance. Per:

http://www.cisco.com/univercd/cc/td/doc/product/rtrmgmt/cw2000/fam_prod/netscout/rel_1_4/7814181.pdf

On Windows RTM 1.4 requires a Dual Pentium-III 750MHz or higher CPU with 2GB RAM. On Solaris, it requires a Dual 500MHz or higher CPU with 4GB RAM.

New Member

Re: CW2000 & nGENIUS RTM on same server

Efectivamente lo recomendado es montarlo en servidores separados.

Pero yo dispongo de las dos aplicaciones ejecutandose en el mismo servidor

Lo unico que hay que tener en cosideracion, son los puertos TCP para el envio de los TRAPS , para evitar problemas , hay que instalar primero CW2000 y luego RTM ...

Saludos

Anonymous
N/A

Re: CW2000 & nGENIUS RTM on same server

I tried and it was not worth the hassle. RTM does not play nice with DFM

Blue

Re: CW2000 & nGENIUS RTM on same server

This may be due to CSCdt62297: 'RTM and another trap receiver application cannot coexist' which has the workaround listed.

New Member

Re: CW2000 & nGENIUS RTM on same server

I am running both on the same W2K server without issues.

New Member

Re: CW2000 & nGENIUS RTM on same server

David,

Are you also running DFM?

103
Views
0
Helpful
6
Replies
CreatePlease to create content