Is Discovery running at the time you were doing the Sync?. Try again when the discovery is not running. In the Host Name field, type in the ip address of the CW2K server, port = 1741 (default), RME Admin UserId= admin and password = admin password (default = admin) and click on Apply to save changes. Then see if you get the same error or else.
I was getting the exact message when trying to export from ANI to Essentials.
Try the following username/password
I found this info when viewing one of the configuration files while troubleshooting this problem, I assume this is the default username and password that is used by the Essentials database since I didn't choose to change any default usernames or passwords.
This is actually a pretty cool feature, i didn't even know it existed until I was looking for a solution to advertise a subnet (prefix in BGP talk), only if a certain condition existed. This is exactly what conditional advertisements does
j ai une question j ai achete un routeur cisco 887VA-k9 , je le configuré avec la configuration ci- dessous
si je le lier avec mon pc portable sur l un de ses ports directement ça marche toute est bien ( la connexion internet + m...
Attached policy provides CLI access to the Cisco 4G router over text messaging. Two files are in the attached .tar file:
2. PDF with instructions on how to load and use the .tcl file.