cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
195
Views
0
Helpful
1
Replies

DDR TUNNEL METRIC ROUTE

amit.singh
Level 1
Level 1

I have a 2mb circuit i have a backup ISDN currently use a higher metric route for the isdn to fire up when the 2mb line goes down have a tunnel configured

and have routes for the tunnel interface now this doesnt have any metric routes its plain static routers all routes in router r static will the isdn fire up coz of the tunnel???? it fires up

eg:-

ip route 10.1.1.0 255.255.255.0 se0

ip route 10.1.1.0 255.255.255.0 bri0

ip route 10.1.2.0 255.255.255.0 tun1

dialer-list permit ip any

1 Reply 1

ciscomoderator
Community Manager
Community Manager

Since there has been no response to your post, it appears to be either too complex or too rare an issue for other forum members to assist you. If you don't get a suitable response to your post, you may wish to review our resources at the online Technical Assistance Center (http://www.cisco.com/tac) or speak with a TAC engineer. You can open a TAC case online at http://www.cisco.com/tac/caseopen

If anyone else in the forum has some advice, please reply to this thread.

Thank you for posting.

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: