Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

DDR TUNNEL METRIC ROUTE

I have a 2mb circuit i have a backup ISDN currently use a higher metric route for the isdn to fire up when the 2mb line goes down have a tunnel configured

and have routes for the tunnel interface now this doesnt have any metric routes its plain static routers all routes in router r static will the isdn fire up coz of the tunnel???? it fires up

eg:-

ip route 10.1.1.0 255.255.255.0 se0

ip route 10.1.1.0 255.255.255.0 bri0

ip route 10.1.2.0 255.255.255.0 tun1

dialer-list permit ip any

1 REPLY

Re: DDR TUNNEL METRIC ROUTE

Since there has been no response to your post, it appears to be either too complex or too rare an issue for other forum members to assist you. If you don't get a suitable response to your post, you may wish to review our resources at the online Technical Assistance Center (http://www.cisco.com/tac) or speak with a TAC engineer. You can open a TAC case online at http://www.cisco.com/tac/caseopen

If anyone else in the forum has some advice, please reply to this thread.

Thank you for posting.

94
Views
0
Helpful
1
Replies
CreatePlease login to create content