%DEC21140-3-ERRINT:

[aattarenzio]

Good day and thanks in advance for your answers.

One 7200 has logged the following error 3 consecutive times in 8 weeks:

%DEC21140-3-ERRINT: FastEthernet0/0 csr0=0xFE024882, csr5=0xFCB6A000

In the CCO very little is available on this error. Has anybody ecountered this problem ? Is it possible to know something more ?

Many thanks

[thisisshanky]

Error message decoder gives the following info..

The Fast Ethernet controller has signaled an error condition on the specified port.

If this persists, you might want to record all that, and open a case with cisco TAC. It could be a hardware problem.

[aattarenzio]

thanks for the reply. I've seen this, but the "error condition" was too wide...

should i replace the I/O controller ?

Cheers.

[thisisshanky]

I am not sure, whether you should replace it....thats why i suggested, if theproblem persists over a period of time, you should consider opening a case with CISCO tac

[aattarenzio]

do you have any more detailed info on that error message ? What is CSR ? Was it cased by a communication problem between the I/O controller and the FE adapter ? Many thanks in advance

[thisisshanky]

CSR could be some internal register. (Looking at the hex value)