Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Defining a Pool to dialer clients using ACS 3.0

I am using a Router 3640 to do remote access. This router make authentication against an ACS 3.0.

I need the clients to get the IP from a pool specified in the ACS.

How can I do this?

1 REPLY
Anonymous
N/A

Re: Defining a Pool to dialer clients using ACS 3.0

You can either have the pools defined

on the AAA server and downloaded to

the NAS:

http://www.cisco.com/univercd/cc/td/doc/product/software/ios122/122cgcr/fdial_c/fnsprt11/dafprusr.htm#xtocid3

Or you can have the pools defined on

the NAS, and just download the name of

the pool for each user from AAA using

the Cisco-Avpair = "ip:addr-pool=POOL_NAME".

86
Views
0
Helpful
1
Replies