Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

defult route

Hello,

Some routers in my company have 2 static routes

0.0.0.0 0.0.0.0 10.172.10.1

0.0.0.0 0.0.0.0 192.20.25.3

Why do i need this?

isn't 0.0.0.0 the default route?

is this case whats the default route in use?

Thanks

3 REPLIES
New Member

Re: defult route

This config will cause the router to load balance to both 10.172.10.1 and 192.20.25.3 for the default route.

Mick.

New Member

Re: defult route

I always use one default route. If we set up two, can they automatically balance each other? If one is down, do all traffic go through the other one? Thanks.

New Member

Re: defult route

thanks, so in the following example i should have only one default (0.0.0.0) route, isn't?

interface Serial0

no ip address

encapsulation frame-relay

no fair-queue

frame-relay lmi-type cisco

!

interface Serial0.16 point-to-point

ip address 10.172.20.2 255.255.255.252 secondary

ip address 172.29.2.60 255.255.255.0

ip directed-broadcast

frame-relay interface-dlci 16 IETF

109
Views
0
Helpful
3
Replies