Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Webcast-Catalyst9k
New Member

Delay for Gigabit Interfaces

I was wondering if someone can let me know how much latency/delay I will get in a solution that is a big ring with 460 Switches Catalsyt 2950G interconnected with 2 Gigabit Interaces (WS-G5486) each one.

1 REPLY

Re: Delay for Gigabit Interfaces

This will not be an easy one to work out without testing, but basically you can have a specific metro solution for the 2950.

Please bear in mind that you will have various packet sizes which will naturally add delay.

This from CCO:

- 13.6-Gbps switching fabric

- 6.8-Gbps maximum forwarding bandwidth

- Forwarding rates based on 64-byte packets

- Cisco Catalyst 2950G-48: 10.1-Mpps wire-speed forwarding rate

- Cisco Catalyst 2950G-24 and 2950G-24-DC: 6.6-Mpps wire-speed forwarding rate

- Cisco Catalyst 2950G-12: 4.8-Mpps wire-speed forwarding rate

- Cisco Catalyst 2950T-24: 6.6-Mpps wire-speed forwarding rate

- Cisco Catalyst 2950C-24: 3.9-Mpps wire-speed forwarding rate

For what you are aiming at, i think a look here would be the best for you..

http://www.cisco.com/en/US/partner/products/hw/switches/ps628/products_data_sheet09186a0080088899.html

80
Views
0
Helpful
1
Replies
CreatePlease to create content