Once you are into html directory then you need to delete all the files into html directory one by one.
I believe now you are into flash:/html/ directory so start deleting individual files one by one and yes in your html directory there is another directory Snmp so you have to go further into snmp directory and delete all files which are into snmp directory.
Try "del flash:/html/*.* " then delete each file as it asks you if you want to delete them, say yes . Not sure why you want or need to delete the file . This file is only relevant if you happen to be one of the few people who use a browser to manage one of these switches .
[toc:faq]The ProblemOn traditional switches whenever we have a trunk
interface we use the VLAN tag to demultiplex the VLANs. The switch needs
to determine which MAC Address table to look in for a forwarding
decision. To do this we require the switch to do...
[toc:faq]Introduction:Netdr is a tool available on a RSP720, Sup720 or
Sup32 that allows one to capture packets on the RP or SP inband. The
netdr command can be used to capture both Tx and Rx packets in the
software switching path. This is not a substitut...
IntroductionOSPF, being a link-state protocol, allows for every router
in the network to know of every link and OSPF speaker in the entire
network. From this picture each router independently runs the Shortest
Path First (SPF) algorithm to determine the b...