delete SVI can remove dhcp snooping on that vlan 6500 platform issue
it is easy to reproduce this issue on 6500 platform:
1, enable dhcp snooping on vlan 100
2, create SVI vlan 100
3, remove interface vlan 100
4, then check dhcp snooping was disable on vlan 100.
question: SVI is layer 3 interface and dhcp snooping is layer 2 function. why remove layer 3 interface can cause layer 2 function stop working?
I did not see this problem on 36xx and 4510 platform. so I guess it is related with 6500 infrastructure. I found one word in the configuration guide:"The DHCP snooping feature is implemented in software on the route processor (RP). Therefore, all DHCP messages for enabled VLANs are intercepted in the PFC and directed to the RP for processing." Is this the root cause? Can anyone provide more detail explaination?
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...