Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Webcast-Catalyst9k
New Member

demand circuit causing problems

Folks,

Learning about demand circuit. for some reason the isdn keeps coming up. debug dialer shows that the bri interface is sending a broadcast, here is the output:

07:21:26: BR1/0 DRY: cdp, 315 bytes, outgoing uninteresting (no list matched)

07:21:26: BR1/0 DDR: sending broadcast to ip 10.10.10.5 -- failed, not connected

my question is why is the bri interface trying to send a broadcast to the other side and how do i prevent it from happening.

Thanks

1 REPLY

Re: demand circuit causing problems

Do you have a dialer map in the isdn configuration. If yes, add the broadcast keyword to the dialer map.

98
Views
0
Helpful
1
Replies
CreatePlease to create content