Deployment of Lightweight Wireless solution on a Routed Access Layer
I am designing my enterprise Network to be fully routed at the different layers, i.e: I will make the Access Layer Routed Access, All access switches will be layer 3 and connections to the distribution layer will be layer 3 links. I know that this deployment requires that each switch has its local vlans and vlan span the Network. The question is: how can I deploy lightweight APs on the access switches in this case?
Re: Deployment of Lightweight Wireless solution on a Routed Acce
LWAPP APs will get an ip address in whichever vlan you connect them and all they need to know is WLC management ip address. So you have to return WLC management ip address via DHCP option 43 and once AP gets that information then all depends on your routing table how to reach WLC.
This is actually a pretty cool feature, i didn't even know it existed until I was looking for a solution to advertise a subnet (prefix in BGP talk), only if a certain condition existed. This is exactly what conditional advertisements does
j ai une question j ai achete un routeur cisco 887VA-k9 , je le configuré avec la configuration ci- dessous
si je le lier avec mon pc portable sur l un de ses ports directement ça marche toute est bien ( la connexion internet + m...
Attached policy provides CLI access to the Cisco 4G router over text messaging. Two files are in the attached .tar file:
2. PDF with instructions on how to load and use the .tcl file.